Follow standard safety precautions when applying Camo Form™ to
weapons. Make sure firearm is not loaded, confirm that the safety is in the "on safe" position and point the barrel away from you at all times. Camo Form should not interfere with the safety or action of a firearm. If this occurs after application, remove Camo Form and reapply in a manner that allows for the proper function of all parts. Instructions:
(1) Start by holding beginning of roll in place on object,
(2) then stretch and wrap Camo Form around desired object.
(3) Overlap the first wrap 1 1/2" then overlap each successive wrap by 1/4 inch.
(4) Camo Form can be cut and attached to cover hard-to-wrap
areas. DO NOT WRAP MOVING PARTS. DO NOT COVER FLASH SUPPRESSOR VENTS, PORTS OR CARTRIDGE EJECTORS. For best adhesion apply in temperatures above 40° F (5° C).
To Clean & Help Maintain Self-Cling Properties: Remove Camo Form from object and hand wash with soap and warm water. Rinse thoroughly and air dry.
Storage: Store Camo Form in sealed plastic bag away from direct sunlight and extreme heat.