|
SHS Piston - 15 Carbon Steel Teeth Blue
|
|
SHS Steel AEG Gear Set - Standard Speed (18:1 gear ratio)
|
|
Our Price: $17.99
In Stock
|
|
|
Our Price: $29.99
Sale Price: $24.99
You save $5.00!
In Stock
|
|
|
|
|
|
The very popular blue SHS Piston - 15 Carbon Steel Teeth - For the price, you cannot beat this airsoft piston. It takes an incredible amount of punishment and keeps on going. Whether you need a replacement for your broken stock piston, you need something that can handle your high rate of fire, or you're looking for a piston that can handle the stress of 500+ FPS, the SHS 15 steel teeth piston is right for the job. Because this piston has a full rack of steel teeth, it is also ideal for short-stroked, high rate of fire guns. It is compatible with almost any version gear box (Versions 2, 3, 6, 7, etc.). The first tooth is slightly lowered to decrease the chance of pre-engagement by the sector gear. A great part to replace your JG, Echo, Marui, or other factory component in your gun currently.
|
SHS Steel AEG Gear Set 18:1 gear ratio (Standard) - These are good quality, affordable, and made out of steel. They are much better than most stock AEG gears. Want a more reliable set of gears so you can run a LiPo? Or just need to replace a broken set of gears and want the most reliable set that won't break the bank? Buy this set! Fits most version 2 (M4, M16, etc.) and version 3 (G36, AK, etc.) mechboxes. Includes one each: spur, bevel, sector gears.
|
|
|
|
SHS Red Aluminum Piston Head
|
|
SHS High Torque Motor (Long)
|
|
Our Price: $15.99
In Stock
|
|
|
|
Our Price: $39.99
In Stock
|
|
|
|
|
|
SHS Red Aluminum Piston Head is super high quality, CNC machined. Made for precision shooting in your custom airsoft gun. Red metal color, very smooth finish for the absolute best performance in your gun.
|
The SHS High Torque Motor has a high strength stator magnet which greatly increases torque. We highly recommend this motor if you are upgrading your spring or installing a high speed gear set. Or, if your stock motor is getting old or generating too much heat, this motor is a great replacement. It is a low cost equivalent of most other ultra-torque motors. The long axle on this motor makes it compatible with most Version 2 guns.
|
|
|
|
SHS 6mm Steel Bushings
|
|
SHS High Speed Motor (Long)
|
Our Price: $6.99
Sale Price: $4.99
You save $2.00!
In Stock
|
|
|
|
Our Price: $39.99
In Stock
|
|
|
|
|
|
SHS 6mm Steel Bushings
|
The SHS High Speed Motor (Long) is super freakin fast. It has the same neodymium magnets as the SHS high torque motor, but larger gauge wiring and fewer turns on the armatures giving it roughly 10,000 rpm more than the SHS high torque (or 10-15 shots per second more, depending on your setup). Turn your gun into a screamer with this high speed motor upgrade. Makes for a great replacement motor if your old one is past its prime. The Long axle on this motor makes it compatible with most Version 2 guns. You will likely need a large type nimh battery or lipo (7.4v or 11.1v) to make the most of this monster.
|
|
|
|
SHS 8mm Steel Bushings
|
|
SHS M120 AEG Spring
|
|
Our Price: $6.99
In Stock
|
|
|
Our Price: $9.99
Sale Price: $7.99
You save $2.00!
In Stock
|
|
|
|
|
|
SHS 8mm Steel Bushings
|
SHS M120 AEG Spring
|
|
|
|
SHS High Speed Motor (Short)
|
|
SHS Tappet Plate - Version 3
|
|
Our Price: $38.99
In Stock
|
|
|
Our Price: $7.99
Sale Price: $6.99
You save $1.00!
In Stock
|
|
|
|
|
|
The SHS High Speed Motor (Short) is super freakin fast. It has the same neodymium magnets as the SHS high torque motor, but larger gauge wiring and fewer turns on the armatures giving it roughly 10,000 rpm more than the SHS high torque (or 10-15 shots per second more, depending on your setup). Turn your gun into a screamer with this high speed motor upgrade. Makes for a great replacement motor if your old one is past its prime. The short axle on this motor makes it compatible with most Version 3 guns. You will likely need a large type nimh battery or lipo (7.4v or 11.1v) to make the most of this monster.
|
SHS Tappet Plate - Version 3
|
|
|
|
SHS AK-47 Air Nozzle
|
|
SHS G36 Air Nozzle
|
|
Our Price: $7.49
In Stock
|
|
|
|
Our Price: $7.49
In Stock
|
|
|
|
|
|
The SHS AK-47 Air Nozzle is a replacement nozzle for most AK-47 AEG variants. Its aluminum construction and internal o-ring makes it a great upgrade from a factory plastic air nozzle. Be sure to use pure silicone oil when lubricating the nozzle stem on your cylinder head before installing this nozzle. Increase your FPS and efficiency with this better sealing and more durable nozzle!
|
The SHS G36 Air Nozzle is a replacement nozzle for most G36 AEGs (H&K Umarex licensed). Its aluminum construction and internal o-ring makes it a great upgrade from a factory plastic air nozzle. Be sure to use pure silicone oil when lubricating the nozzle stem on your cylinder head before installing this nozzle. Increase your FPS and efficiency with this better sealing and more durable nozzle!
|
|
|
|
SHS Air Nozzle O-Ring (6 pack)
|
|
SHS Tappet Plate - Version 2
|
Our Price: $3.49
Sale Price: $2.99
You save $0.50!
In Stock
|
|
|
Our Price: $7.99
Sale Price: $6.99
You save $1.00!
In Stock
|
|
|
|
|
|
SHS Air Nozzle O-Ring - An often overlooked aspect of gear box maintenance, the o-ring inside your nozzle can wear out or may not be a perfect match for your cylinder head. These little o-rings are perfect upgrades / replacements for nozzles that already have o-rings. Stop beating your head against the wall wondering why your 120 spring is only resulting in 330 FPS, and get one of these today!
|
SHS Tappet Plate - Version 2
|
|
|
|
SHS Shim Set
|
|
SHS Piston Head O-Ring (6-Pack)
|
Our Price: $4.99
Sale Price: $3.99
You save $1.00!
In Stock
|
|
|
Our Price: $3.99
Sale Price: $2.99
You save $1.00!
In Stock
|
|
|
|
|
|
SHS Shim Set.
|
SHS Piston Head O-Ring (6 pack)
|
|
|
|
SHS Spring Set for Version 3 Mechbox
|
|
SHS Version 3 Trigger Switch Assembly
|
Our Price: $8.99
Sale Price: $6.99
You save $2.00!
In Stock
|
|
|
Our Price: $9.99
Sale Price: $7.99
You save $2.00!
In Stock
|
|
|
|
|
|
SHS Spring Set for Version 3 Gearboxes
|
SHS Version 3 Trigger Switch Assembly
|
|
|
|
SHS High Torque Motor (Short)
|
|
SHS Steel AEG Gear Set - High Speed (16:1 gear ratio)
|
|
Our Price: $38.99
In Stock
|
|
|
Our Price: $29.99
Sale Price: $24.99
You save $5.00!
In Stock
|
|
|
|
|
|
The SHS High Torque Motor has a high strength stator magnet which greatly increases torque. We highly recommend this motor if you are upgrading your spring or installing a high speed gear set. Or, if your stock motor is getting old or generating too much heat, this motor is a great replacement. It is a low cost equivalent of most other ultra-torque motors. The short axle on this motor makes it compatible with most Version 3 guns.
|
SHS AEG Gear Set - High Speed gears. These are good quality, affordable, steel gears. They are much better than most stock AEG gears. Want a faster rate of fire? Buy this set! The standard ratio for gears is 18:1, while these are 16:1 so you get more turns of the sector gear per revolution of the motor's pinion gear. Fits most version 2 (M4, M16, etc.) and version 3 (G36, AK, etc.) mechboxes.
|
|
|
|
SHS Steel AEG M14 Gear Set
|
|
SHS Motor Shaft Guide
|
Our Price: $29.99
Sale Price: $24.99
You save $5.00!
In Stock
|
|
|
|
Our Price: $8.49
In Stock
|
|
|
|
|
|
SHS AEG Gear Set for the M14 rifle
|
The SHS Motor Shaft Guide, made of aluminum for your airsoft motor.
|
|
|
|
SHS M4 Hopup Chamber
|
|
SHS Version 3 Selector Plate (AK)
|
Our Price: $18.99
Sale Price: $15.99
You save $3.00!
In Stock
|
|
|
Our Price: $9.99
Sale Price: $7.99
You save $2.00!
In Stock
|
|
|
|
|
|
SHS M4 Hopup Chamber. Comes with all the internal parts needed to operate (adjustment wheel, hopup arm, nub, etc.).
|
SHS Version 3 (AK) Selector Plate
|
|
|
|
SHS Safety Lever for Version 2 Gear Boxes
|
|
SHS Pinion Motor Gear O-Type
|
Our Price: $5.99
Sale Price: $4.99
You save $1.00!
In Stock
|
|
|
|
Our Price: $7.99
In Stock
|
|
|
|
|
|
SHS Safety Lever for Version 2 Gear Boxes - These are the internal parts that block the trigger from being pulled when the selector switch is in the safe position.
|
The SHS Pinion Motor Gear O-Type is a steel, press fit upgrade for AEG motors. Fits O-type motor gears. We have a D-type sold separately.
|
|
|
|
SHS Cut Off Lever - for M14 / Version 7
|
|
SHS 9mm Steel Bearings
|
|
Our Price: $6.99
In Stock
|
|
|
Our Price: $13.99
Sale Price: $10.99
You save $3.00!
In Stock
|
|
|
|
|
|
SHS Cut Off Lever - for M14 / Version 7
|
SHS 9mm Steel Bearings - High strength replacements for damaged 9mm bearings. Compatible with KWA and most other 9mm gear box shells.
|
|
|
|
SHS Bearing Spring Guide - Version 3
|
|
SHS Spring Set for Version 7 M14 Mechbox
|
|
Our Price: $16.99
In Stock
|
|
|
|
Our Price: $8.99
In Stock
|
|
|
|
|
|
The SHS Bearing Spring Guide is a great, low cost replacement for stock, plastic spring guides. The bearing will help prevent springs from breaking and its steel construction allows it to handle springs in excess of m170.
|
SHS Spring Set for Version 7 M14 Gearbox
|
|
|
