website
{"id":6633082617937,"title":"Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set","handle":"airtech-studios-maxx-hopup-chamber-and-barrel-o-ring-set","description":"\u003cp\u003eAirtech Studios Maxx Hopup Chamber and Barrel O-Ring Set. \u003c\/p\u003e\n\u003cp\u003eThe Advanced locking ring is designed to replace the current airsoft Maxx O-ring (Normally brass) ring at the end of setting up the hop unit, however, with the original, there is a tendency for a wobbly gap in between the components which would tilt the barrel at an angle.\u003c\/p\u003e\n\u003cp\u003eOnce the new o-ring is installed, it will ensure a snug fit to restrict the motion of the barrel that is inside the hop-up chamber. It will secure the inner barrel and maintains itself steadily locked in the true horizontal position. Even when shots are fired, which is the moment where there is the most stress and vibration at the hop-up, the O-ring will ensure the structure is intact.\u003c\/p\u003e\n\u003cp\u003eThis in turn will create a dependable system for the BB to travel down the barrel undisturbed for the most consistent and accurate shots.\u003c\/p\u003e\n\u003cp\u003eThe new Advanced Oring is also designed longer in size to lock more of the inner barrel and hop-ups surface area to further stabilize the sensitive system. \u003c\/p\u003e\n\u003cp\u003e- Fully lock on the inner barrel and hop-up chamber.\u003cbr data-mce-fragment=\"1\"\u003e- Elongated O-ring to latch onto the inner barrel.\u003cbr data-mce-fragment=\"1\"\u003e- Stabilized System Prevents any vibrational shift on the hop set-up.\u003cbr data-mce-fragment=\"1\"\u003e- Improve shooting consistency.\u003cbr data-mce-fragment=\"1\"\u003e- Tough Polycarbonate Construction. \u003cspan data-mce-fragment=\"1\"\u003e6x silicone o-rings are also included with the package used to replace the spring that goes along the inner barrel. Tests incrementally you need for a perfect fit.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Compatible with all Maxx hop-up chambers on the M4 platform.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn general, anything that moves in the rifle especially in the hop-up\/ inner barrel should be strictly locked down to eliminate the factors that could affect the consistencies of the shots fired.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis upgrade is for those who would strive for absolute perfection for their gun setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e✔️MAXX CNC Aluminum Hop-up Chamber ME - PRO \u0026amp; SPORT\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e✔️MAXX \u003c\/span\u003eCNC Aluminum Hop-up Chamber MI - PRO \u0026amp; SPORT\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e✔️MAXX \u003c\/span\u003eCNC Aluminum Hop-up Chamber SV - VFC SCAR-L\/H\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e✔️MAXX \u003c\/span\u003eCNC Aluminum Hop-up Chamber ME - Umbrella Armory Version\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e✔️MAXX \u003c\/span\u003eCNC Aluminum Hop-up Chamber ME - EMG \u0026amp; Specna Arms Version\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* Please note the Maxx hop-up chamber is not included specifically and are for demonstration purposes only - this is an upgrade item made FOR the Maxx Chamber*\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eDue to manufacturing tolerances of the Maxx chamber and Inner barrel you intend to use, light sanding may be required to ensure the perfect fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe Oring is designed to be a tight fit for the best performance. Try the O-ring onto the inner barrel first. If it's too tight, you can sand inside the ring until it's nice and snug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eII.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNext try fitting just the O-ring into the Hop-up chamber. If too tight you can sand off the surface of the outer part of the ring until its snug but not too tight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIII.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOnce you are happy, it may be difficult to slide the O-ring down towards the hop-up chamber. We tend to use a adjustable spanner to assist in sliding it down until it's locked. Add silicone oil inside would make it easier to slide also. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecial Note\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eit is normal in many cases for the O-ring not to be fully inserted into the chamber, due to tolerences between the chamber and inner barrel brands. This will leave a slight gap of around 0.5mm. Do not try to force it any further as that could damage the Oring and\/or hop up chamber.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIV.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo removes the O-ring for maintenance, ensure the hop-up is on the neutral 0 settings, and simply twist the inner barrel. The o-ring will twist off alongside the barrel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work on all Maxx chambers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. We've done extensive testing and research throughout and have worked well. The first generation TE versions (Red in color) will not work with this O-ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe O-ring does not go fully inside the hop-up chamber.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is normal and doesn't need to be fully functional to lock the inner barrel and hop up together due to factory tolerence between the inner barrel and hop up chamber. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWould it work for other rotary chambers that are not Maxx brand. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot likely, however, we do have another version we offer that works with other brands like G\u0026amp;G, Krytac, Prowin, Madbull, Lonex etc., and another version that works with the KWA and ICS rotary brands. Check our website for more information and pic.\u003c\/p\u003e","published_at":"2021-08-27T14:39:24-04:00","created_at":"2021-08-27T14:39:24-04:00","vendor":"Airtech Studios","type":"AEG Parts - External,AEG Parts - Internal","tags":[],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39483502264401,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"IBR-MAXX-BLU","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set","public_title":null,"options":["Default Title"],"price":999,"weight":45,"compare_at_price":null,"inventory_quantity":33,"inventory_management":"shopify","inventory_policy":"deny","barcode":"859188324749","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/MaxxAdvancedElongatedOringwithSiliconeRings_1024x1024_2x_06b731e9-38b9-4d9c-b5ef-5774afe3b7ed.png?v=1678857294","\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9064PNG_1024x1024_2x_cedb9732-b980-482e-8014-95b08126b66a.png?v=1678857303","\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9067PNG_1024x1024_2x_0ca01a79-203a-4050-b79d-d5ef11d7e0d6.png?v=1678857314","\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9198PNG_1024x1024_2x_7c072bfd-4a35-4837-9188-c3b55d7aab1e.png?v=1678857327","\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9199PNG_1024x1024_2x_8bd280b7-82ab-408f-8ce5-953aebebba71.png?v=1678857340","\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9204PNG_1024x1024_2x_515209ef-70b5-4bcd-8241-c61dd90ee3a0.png?v=1678857355","\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9301-PNG_1024x1024_2x_ef231a4a-7542-4ea9-8b95-3baafe277a7a.png?v=1678857370","\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9325PNG_1024x1024_2x_ddf84677-fd67-4089-a010-ae084aa4ecb1.png?v=1678857380","\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/DSC09729.jpg?v=1678857382","\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/DSC09728.jpg?v=1678857384"],"featured_image":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/MaxxAdvancedElongatedOringwithSiliconeRings_1024x1024_2x_06b731e9-38b9-4d9c-b5ef-5774afe3b7ed.png?v=1678857294","options":["Title"],"media":[{"alt":"Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set","id":20977637228625,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/MaxxAdvancedElongatedOringwithSiliconeRings_1024x1024_2x_06b731e9-38b9-4d9c-b5ef-5774afe3b7ed.png?v=1678857294"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/MaxxAdvancedElongatedOringwithSiliconeRings_1024x1024_2x_06b731e9-38b9-4d9c-b5ef-5774afe3b7ed.png?v=1678857294","width":2048},{"alt":"Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set","id":20977637261393,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9064PNG_1024x1024_2x_cedb9732-b980-482e-8014-95b08126b66a.png?v=1678857303"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9064PNG_1024x1024_2x_cedb9732-b980-482e-8014-95b08126b66a.png?v=1678857303","width":2048},{"alt":"Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set","id":20977637294161,"position":3,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9067PNG_1024x1024_2x_0ca01a79-203a-4050-b79d-d5ef11d7e0d6.png?v=1678857314"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9067PNG_1024x1024_2x_0ca01a79-203a-4050-b79d-d5ef11d7e0d6.png?v=1678857314","width":2048},{"alt":"Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set","id":20977637326929,"position":4,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9198PNG_1024x1024_2x_7c072bfd-4a35-4837-9188-c3b55d7aab1e.png?v=1678857327"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9198PNG_1024x1024_2x_7c072bfd-4a35-4837-9188-c3b55d7aab1e.png?v=1678857327","width":2048},{"alt":"Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set","id":20977637359697,"position":5,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9199PNG_1024x1024_2x_8bd280b7-82ab-408f-8ce5-953aebebba71.png?v=1678857340"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9199PNG_1024x1024_2x_8bd280b7-82ab-408f-8ce5-953aebebba71.png?v=1678857340","width":2048},{"alt":"Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set","id":20977637392465,"position":6,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9204PNG_1024x1024_2x_515209ef-70b5-4bcd-8241-c61dd90ee3a0.png?v=1678857355"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9204PNG_1024x1024_2x_515209ef-70b5-4bcd-8241-c61dd90ee3a0.png?v=1678857355","width":2048},{"alt":"Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set","id":20977637425233,"position":7,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9301-PNG_1024x1024_2x_ef231a4a-7542-4ea9-8b95-3baafe277a7a.png?v=1678857370"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9301-PNG_1024x1024_2x_ef231a4a-7542-4ea9-8b95-3baafe277a7a.png?v=1678857370","width":2048},{"alt":"Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set","id":20977637458001,"position":8,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9325PNG_1024x1024_2x_ddf84677-fd67-4089-a010-ae084aa4ecb1.png?v=1678857380"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/IMG_9325PNG_1024x1024_2x_ddf84677-fd67-4089-a010-ae084aa4ecb1.png?v=1678857380","width":2048},{"alt":"Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set","id":20977637654609,"position":9,"preview_image":{"aspect_ratio":1.394,"height":861,"width":1200,"src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/DSC09729.jpg?v=1678857382"},"aspect_ratio":1.394,"height":861,"media_type":"image","src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/DSC09729.jpg?v=1678857382","width":1200},{"alt":"Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set","id":20977637687377,"position":10,"preview_image":{"aspect_ratio":1.281,"height":937,"width":1200,"src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/DSC09728.jpg?v=1678857384"},"aspect_ratio":1.281,"height":937,"media_type":"image","src":"\/\/www.airsoftatlanta.com\/cdn\/shop\/products\/DSC09728.jpg?v=1678857384","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAirtech Studios Maxx Hopup Chamber and Barrel O-Ring Set. \u003c\/p\u003e\n\u003cp\u003eThe Advanced locking ring is designed to replace the current airsoft Maxx O-ring (Normally brass) ring at the end of setting up the hop unit, however, with the original, there is a tendency for a wobbly gap in between the components which would tilt the barrel at an angle.\u003c\/p\u003e\n\u003cp\u003eOnce the new o-ring is installed, it will ensure a snug fit to restrict the motion of the barrel that is inside the hop-up chamber. It will secure the inner barrel and maintains itself steadily locked in the true horizontal position. Even when shots are fired, which is the moment where there is the most stress and vibration at the hop-up, the O-ring will ensure the structure is intact.\u003c\/p\u003e\n\u003cp\u003eThis in turn will create a dependable system for the BB to travel down the barrel undisturbed for the most consistent and accurate shots.\u003c\/p\u003e\n\u003cp\u003eThe new Advanced Oring is also designed longer in size to lock more of the inner barrel and hop-ups surface area to further stabilize the sensitive system. \u003c\/p\u003e\n\u003cp\u003e- Fully lock on the inner barrel and hop-up chamber.\u003cbr data-mce-fragment=\"1\"\u003e- Elongated O-ring to latch onto the inner barrel.\u003cbr data-mce-fragment=\"1\"\u003e- Stabilized System Prevents any vibrational shift on the hop set-up.\u003cbr data-mce-fragment=\"1\"\u003e- Improve shooting consistency.\u003cbr data-mce-fragment=\"1\"\u003e- Tough Polycarbonate Construction. \u003cspan data-mce-fragment=\"1\"\u003e6x silicone o-rings are also included with the package used to replace the spring that goes along the inner barrel. Tests incrementally you need for a perfect fit.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Compatible with all Maxx hop-up chambers on the M4 platform.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn general, anything that moves in the rifle especially in the hop-up\/ inner barrel should be strictly locked down to eliminate the factors that could affect the consistencies of the shots fired.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis upgrade is for those who would strive for absolute perfection for their gun setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e✔️MAXX CNC Aluminum Hop-up Chamber ME - PRO \u0026amp; SPORT\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e✔️MAXX \u003c\/span\u003eCNC Aluminum Hop-up Chamber MI - PRO \u0026amp; SPORT\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e✔️MAXX \u003c\/span\u003eCNC Aluminum Hop-up Chamber SV - VFC SCAR-L\/H\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e✔️MAXX \u003c\/span\u003eCNC Aluminum Hop-up Chamber ME - Umbrella Armory Version\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e✔️MAXX \u003c\/span\u003eCNC Aluminum Hop-up Chamber ME - EMG \u0026amp; Specna Arms Version\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* Please note the Maxx hop-up chamber is not included specifically and are for demonstration purposes only - this is an upgrade item made FOR the Maxx Chamber*\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eDue to manufacturing tolerances of the Maxx chamber and Inner barrel you intend to use, light sanding may be required to ensure the perfect fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe Oring is designed to be a tight fit for the best performance. Try the O-ring onto the inner barrel first. If it's too tight, you can sand inside the ring until it's nice and snug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eII.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNext try fitting just the O-ring into the Hop-up chamber. If too tight you can sand off the surface of the outer part of the ring until its snug but not too tight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIII.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOnce you are happy, it may be difficult to slide the O-ring down towards the hop-up chamber. We tend to use a adjustable spanner to assist in sliding it down until it's locked. Add silicone oil inside would make it easier to slide also. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecial Note\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eit is normal in many cases for the O-ring not to be fully inserted into the chamber, due to tolerences between the chamber and inner barrel brands. This will leave a slight gap of around 0.5mm. Do not try to force it any further as that could damage the Oring and\/or hop up chamber.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIV.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTo removes the O-ring for maintenance, ensure the hop-up is on the neutral 0 settings, and simply twist the inner barrel. The o-ring will twist off alongside the barrel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work on all Maxx chambers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. We've done extensive testing and research throughout and have worked well. The first generation TE versions (Red in color) will not work with this O-ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe O-ring does not go fully inside the hop-up chamber.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is normal and doesn't need to be fully functional to lock the inner barrel and hop up together due to factory tolerence between the inner barrel and hop up chamber. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWould it work for other rotary chambers that are not Maxx brand. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot likely, however, we do have another version we offer that works with other brands like G\u0026amp;G, Krytac, Prowin, Madbull, Lonex etc., and another version that works with the KWA and ICS rotary brands. Check our website for more information and pic.\u003c\/p\u003e"}

Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set

Product Description
$9.99
Maximum quantity available reached.

Airtech Studios Maxx Hopup Chamber and Barrel O-Ring Set. 

The Advanced locking ring is designed to replace the current airsoft Maxx O-ring (Normally brass) ring at the end of setting up the hop unit, however, with the original, there is a tendency for a wobbly gap in between the components which would tilt the barrel at an angle.

Once the new o-ring is installed, it will ensure a snug fit to restrict the motion of the barrel that is inside the hop-up chamber. It will secure the inner barrel and maintains itself steadily locked in the true horizontal position. Even when shots are fired, which is the moment where there is the most stress and vibration at the hop-up, the O-ring will ensure the structure is intact.

This in turn will create a dependable system for the BB to travel down the barrel undisturbed for the most consistent and accurate shots.

The new Advanced Oring is also designed longer in size to lock more of the inner barrel and hop-ups surface area to further stabilize the sensitive system. 

- Fully lock on the inner barrel and hop-up chamber.
- Elongated O-ring to latch onto the inner barrel.
- Stabilized System Prevents any vibrational shift on the hop set-up.
- Improve shooting consistency.
- Tough Polycarbonate Construction. 6x silicone o-rings are also included with the package used to replace the spring that goes along the inner barrel. Tests incrementally you need for a perfect fit.
- Compatible with all Maxx hop-up chambers on the M4 platform.

In general, anything that moves in the rifle especially in the hop-up/ inner barrel should be strictly locked down to eliminate the factors that could affect the consistencies of the shots fired.

This upgrade is for those who would strive for absolute perfection for their gun setup.

Compatibility
✔️MAXX CNC Aluminum Hop-up Chamber ME - PRO & SPORT
✔️MAXX CNC Aluminum Hop-up Chamber MI - PRO & SPORT
✔️MAXX CNC Aluminum Hop-up Chamber SV - VFC SCAR-L/H
✔️MAXX CNC Aluminum Hop-up Chamber ME - Umbrella Armory Version
✔️MAXX CNC Aluminum Hop-up Chamber ME - EMG & Specna Arms Version

* Please note the Maxx hop-up chamber is not included specifically and are for demonstration purposes only - this is an upgrade item made FOR the Maxx Chamber*

Installation tips

Warning: Due to manufacturing tolerances of the Maxx chamber and Inner barrel you intend to use, light sanding may be required to ensure the perfect fit.

I. The Oring is designed to be a tight fit for the best performance. Try the O-ring onto the inner barrel first. If it's too tight, you can sand inside the ring until it's nice and snug.

II. Next try fitting just the O-ring into the Hop-up chamber. If too tight you can sand off the surface of the outer part of the ring until its snug but not too tight.

III. Once you are happy, it may be difficult to slide the O-ring down towards the hop-up chamber. We tend to use a adjustable spanner to assist in sliding it down until it's locked. Add silicone oil inside would make it easier to slide also. 

Special Note it is normal in many cases for the O-ring not to be fully inserted into the chamber, due to tolerences between the chamber and inner barrel brands. This will leave a slight gap of around 0.5mm. Do not try to force it any further as that could damage the Oring and/or hop up chamber.

IV. To removes the O-ring for maintenance, ensure the hop-up is on the neutral 0 settings, and simply twist the inner barrel. The o-ring will twist off alongside the barrel.

FAQ

Does it work on all Maxx chambers?

Yes. We've done extensive testing and research throughout and have worked well. The first generation TE versions (Red in color) will not work with this O-ring.

The O-ring does not go fully inside the hop-up chamber.

This is normal and doesn't need to be fully functional to lock the inner barrel and hop up together due to factory tolerence between the inner barrel and hop up chamber. 

Would it work for other rotary chambers that are not Maxx brand. 

Not likely, however, we do have another version we offer that works with other brands like G&G, Krytac, Prowin, Madbull, Lonex etc., and another version that works with the KWA and ICS rotary brands. Check our website for more information and pic.

Sku: IBR-MAXX-BLU

We ship fast.  We don't slack off when it comes to internet orders in the day of Amazon Prime, so as a small business, we have to work extra hard to prove ourselves to players that expect fast service.

All orders ship out same or next business day.  We don't pre-sell (pre-orders) merchandise we don't have physically on-hand, currently in our warehouse, and ready to ship.  We just don't do that kind of thing.  Seriously, we do not screw around and delay orders.  We know you want your package fast, so we take steps to ensure your order arrives safely ASAP.  All orders will receive an notification with tracking information after it ships.  You can also log into your account here to view the current tracking progress.

Order Cancellation policy: Customers must inform us ASAP via email with their order # in the subject heading if they wish to cancel.  Please cancel within 1 hour of placing your order. If we don't receive the email in time, it will ship same-day and you will be responsible for the shipping costs and return fees. We are not responsible for missed emails on cancellations.

Stolen Packages: Insurance and purchase protection does not cover porch theft after it has been delivered.  Packages delivered are your responsibility.  Ship to your office, work, or a friend's house that is secure if worried. If your package was stolen, please contact the carrier immediately and file a police report.  Signatures required on expensive packages, so be home or ship to your work address if needed.

Professional Service:  100% of the Airsoft Atlanta staff has played airsoft for many years.  We promise to treat your order like it was our own package, with care, and speedy delivery.

Map of Recent Customers:

 

FedEx Rate:  Orders placed with FedEx rate is of our choice in the shipping method.  FedEx Ground for heavy/larger packages and Priority for smaller.  Will ship out same or next business day fast. We cannot ship via FedEx to PO Boxes.  Please change your address to a physical address if using FedEx.

USPS Priority:  Orders placed by in the morning usually go out the same-day.  Orders generally placed after 10am go out the next business day. Weekend Orders ship Monday.

USPS First Class Mail:  Orders placed by 10am usually go out the same-day.  First class is the slowest shipping method, so please don't be in a rush if you choose this option.  We recommend Priority for 2-3 day delivery for just slightly more.  First class can take up to a week or sometimes 2-3 days.  There's no guarantee on this option.  First class is only for small packages under 1 pound.  We may ship in padded envelopes.

Fedex Home Ground packages ship same-day if ordered before 10am.  This is the fastest method if you're in the south east USA.  Orders placed over the weekend ship on Monday.  See our Ground Map to see when your order will arrive:

 Airsoft Shipping

USA Restricted Shipping

California - airsoft guns will be shipped with new colored strips to adhere to its new gun laws (SB 199).  No gun sales to San Francisco (parts and gear okay to ship).

Illinois - No airsoft guns to the city of Chicago (parts and gear okay to ship)

New York - NYC / 5 boroughs airsoft gun orders will be cancelled immediately. Parts and gear are okay to ship, just no guns.  NY state will have guns marked with neon orange are per required.  It's up to the customer to follow their local laws. Guns that are hard to mark will be cancelled at our discretion (springers).

Massachusetts - Adult signature of 21+ on all airsoft gun shipments.

Pennsylvania - No airsoft guns to the city of Philadelphia (parts and gear okay to ship)

Washington DC - No sales to DC.  We can ship to areas outside of DC.

NO SALES TO MINORS! PERIOD! 18+ strictly. Ultimately it's up to you to check with your existing laws and codes are before purchase.  All sales are made in the state of Georgia and you are contracting a separate shipping company to your state.

Orders to APO, Guam, Puerto Rico, US Virgin Islands, Wake Island, Alaska, and Hawaii addresses ship via the US Postal Service (USPS). The orders are packed (usually in 24 hours) and shipped via US Priority Mail service - fully insured and with signature required (cost included).

International Orders - We only ship to USA addresses.

  1. Please use a freight forwarder located in the USA if you would like to order from us.  We can ship to your forwarder - please use Paypal and confirm their verified address through Paypal before ordering.
  2. Use Paypal only.  Credit cards are not accepted.

Brazil - Use a freight forwarder - see above.

CanadaYour government is terrible and holds packages for 5+ weeks in customs + high tax fees.  We suggest you order from a domestic Canada shop or prepare to wait a long time.  Use a freight forwarder - see above.

Europe / UK / All other countries - Use a freight forwarder - see above

All international orders - Use a freight forwarder - see above.  Customs clearance and VAT taxes is YOUR responsibility.  No warranty or returns/exchanges. All sales final outside the USA.

We will ship guns to a USA address, such as a freight forwarder, if you want to go that route. There are many freight forwarders in the USA that will be willing to export our merchandise. We can also ship to a hotel in the USA.

If you have any importing questions, email us on our contact page.

How do I return/exchange an item?

We are proud to have the best customer service in the airsoft retail industry. We are here to make sure your experience buying airsoft products online goes as smoothly as possible. If you have an issue, please contact us as soon as possible. We will remedy the situation to the best of our ability in a timely manner.

Customer service for orders can be reached on our contact us page.  When emailing us, please include your order # + full name and contact information.

A quick note about our returns policy: Airsoft guns are considered a hobby-grade, electronic product. Airsoft products are not consumer grade toys. These are susceptible electronic devices that can easily be damaged without proper care. They are also considered weapons in some jurisdictions, so like real firearms' shops, we have an 'all sales final' policy. However, to keep our customers happy, we have the following exceptions to the all sales final policy:

 

Returns: In most cases We do not offer returns on any of our products. All sales are considered final due to the nature of airsoft products.  We offer some return exceptions on a case by case basis. but generally all sales are final. If we do take back a product there is a 25% restock fee. NO EXCEPTIONS

 

Gun Warranties:  Guns are fully warrantied directly through the manufacturer on ALL guns.  Umarex, G&G, Valken, ASG and others all have extended warranties for 30 days - 1 year duration depending on the item.  Please check with the manufacturer on the warranty for defects.  Airsoft Atlanta does not cover returns/warranties for guns with manufacturer defects. 

For issues with any guns within warranty of that product purchased you must contact the Manufacture directly. 

In-Store Retail Sales Exchange/Return Policy: No Returns. All sales are final.

Additional Exchange/Return Policy Information:

Airsoft guns are a niche hobby industry product not fit for general consumer consumption. These are fragile, advanced electronic, non-toy products. Airsoft guns are hobby products intended for adult use only. These are not meant for minors under the age of 18 to play with. If you purchase an airsoft product for your kid, and they destroy it with improper use, that's not our responsibility. Misuse, user damage, or user modification voids all exchanges and returns. Please see list below:

Manufacturers directly cover most warranty issues.  Please contact them if you're having a gun issue.

Exchanged items requirements:

  • does not show any sign of wear, user modification, or user caused damage in any way.  No scratches, paint marks, or user repairs.
  • no customer damaged parts, guns, improperly installed, or used items
  • drum magazines are not warrantied through us.  We do not warranty drums due to being highly sensitive to use and BB types. We make no guarantee on drums
  • original orange tip must not be altered, scratched, painted black, or removed (against federal law) - no exceptions
  • be in original packaging with all manuals, tools, packaging, and accessories included in new or like-new condition
  • must not be batteries, bbs, parts, upgrade parts, parts' compatibility issues (responsibility of the customer), custom built guns, EG Smoke, or other consumable items. No exchange or returns on parts.
  • guns that don't perform up your level of expectation are not a defect and are not covered for the warranty.  We don't guarantee groupings or accuracy
  • clearance sale products are sold as-is final (clearance, blow-out sale items, open box, custom built guns, sale, deal of the day, salvage garden, etc, cannot be returned or exchanged - no exceptions)
  • clothing and apparel items may be exchanged for a different size, so long as all original tags are not removed. Clothing may not be used or washed before exchange.

Airsoft Atlanta
3860 Green Industrial Way
Atlanta, GA 30341


Contact Customer Service at customer_service@airsoftatlanta.com 

Customer agrees to all policies before placing an order online or in the store-front.

Related products